Gyraline alignment tools
Wheel alignment without the shop visit
Gyraline turns your phone into an alignment tool. Measure toe, camber, and caster in your own driveway so you can focus on driving, not sitting in a waiting room.
Sample layout created for discussion only. All product rights belong to Gyraline.
What Gyraline measures
Measure more than just toe
Many quick tools only give a rough check. Gyraline reads individual toe, camber, and caster so you can build a repeatable setup that feels right and keeps tires alive.
Toe
See front and rear toe together so you can dial in straight line stability, safe highway manners, and quick turn in.
Camber
Balance grip and wear with camber that matches your driving, from the daily commute to track days and canyon runs.
Caster
Set steering feel and return to center with clear data instead of guesswork or only factory marks.
Hardware you can trust
Built to live in real garages and race trailers
The Gyraline bracket is printed in strong PETG with stainless clamping hardware. It grips the wheel while you roll the car and make changes without scratching wheels or bending.
The molds are tuned for detail and strength. That keeps the tool light, rigid, and ready for long term use in real world conditions.
Software features
Packed with the tools you actually need
G2 adds integrated sensors and smart software. Scan the VIN, load factory specs, and see a full four wheel check with settings ready for home use and shop work.
4 point alignment check
See all four wheels at once and get a clear picture of how the front and rear axles line up in about 20 seconds.
Vin scan and auto specs
Scan the VIN and load alignment specs automatically so you are not hunting for charts while the car sits on the ground.
Works with any phone
Use the phone you already own. iOS or Android, the app walks you through each step with clear prompts.
Save and reuse profiles
Store your own specs so you can return to a known setup after a part change or seasonal tire swap.
Hardware options
CNC housings for daily use and shop duty
G2 housings are CNC machined so they feel solid in the hand and hold up to repeated use. Choose Delrin for a light setup that travels well or aluminum for heavy duty shop work.
Accuracy and testing
Engineered for accuracy, tested against alignment racks
Gyraline readings are not just estimates. The tool has been run side by side with professional alignment machines to confirm that toe stays within tight limits in controlled tests.
- Toe measurements matched reference machines within a small fraction of a degree.
- Repeatable results over many runs on the same vehicle.
- Supports alignments within common factory spec ranges.
Examples
See how different drivers use Gyraline
Each driver type can have its own page with photos, setups, and tips. From track days to trails to weekend projects, the tool fits different stories.
For racers
Quick toe checks between runs and after small bumps so the car feels the same at the end of the weekend as it did at the start.
Open racer page
For offroad rigs
Keep lifted trucks and trail rigs aligned after new parts or hard trips so they track straight on the road again.
Open offroad page
For diy drivers
Project cars, daily drivers, and family cars all benefit from quick driveway checks after repairs or modifications.
Open diy pageReal world feedback
What drivers say about Gyraline
Gyraline is used on drift cars, daily drivers, lifted rigs, and project builds. Many owners say it paid for itself after only a few alignments that did not need a shop visit.
“I can check alignment between runs and after small bumps. The car feels the same at the end of the weekend as it did at the start, and I catch problems early.”
Track day driver, Texas
Ready to align like a pro
Skip the schedule and the waiting room. With Gyraline you measure toe, camber, and caster whenever you change parts, swap tires, or notice a change in how the car feels.